Autel 808 Series Tablets Update on June 1st

Autel 808 series tablet products were updated on June 1st, and the new functions are as follows:

① Adds All System Special Functions and Active Test

[Applicable Models]
Autel MaxiCOM MK808/ MK808BT/ MK808TS
Autel MaxiCheck MX808/ MX808TS
Autel MaxiTPMS TS608
Autel MaxiIM IM508

② Supports Battery Testing Functions, compatible with Autel MaxiBAS BT506.

[Applicable Models]
Autel MaxiCOM MK808BT/ MK808TS
Autel MaxiPRO MP808BT/ MP808TS
Autel MaxiCheck MX808TS
Autel MaxiDAS DS808BT/ DS808TS

③ Compatible with Endoscopes extends Camera Reach, compatible with Autel MaxiVideo MV105/ MV108.

[Applicable Models]
Autel MaxiCOM MK808/ MK808BT/ MK808TS
Autel MaxiPRO MP808/ MP808BT/ MP808TS
Autel MaxiCheck MX808/ MX808TS
Autel MaxiDAS DS808/ DS808BT/ DS808K/ DS808TS

④ Autel Maxisys elite II adds diagnosis function

⑤ The Auto auth function of the North American FCA car series is available for e-commerce models (excluding the European FCA SGW)

FAQ about this big update:
 
Q: The US FCA function is enabled. Among the listed product models, there are no MS908/ MS908P/ MS906PRO-TS models. Is it not supported or omitted?
 
A: Autel MaxiSys MS906 Pro-TS supports.
 
Q: Autel MaxiCheck MX808/ Autel MaxiCOM MK808 have added special functions (in the control unit) and action test, so whether the previous products have been added simultaneously, can these functions be upgraded only by software upgrade? In the same way to expand the function, is it the same for all Autel 808 series products to add endoscopes and all-in-one machines to add battery detection?
 
A: You can get the new functions by upgrading the management program and the car software.
 
Q: Autel MaxiSys MS906 currently does not support endoscopes. Will this upgrade be activated simultaneously?

A: Autel MaxiSys MS906 does not support endoscope, because Autel MaxiSys MS906 does not have a USB port and cannot be added.
 
Q: Is the software version burned by the machine shipped later is the latest? Or, is there any software for endoscope or battery detection in some 808 series software in the back?
 
A: The machines shipped after the release of the new functions will carry the newly added functions, and the machines shipped before the release must be downloaded by the customers themselves.
 
Q: I have two machines Autel MaxiCOM MK906BT and Autel MaxiCOM MX808BT, is it normal for MK906BT to receive this kind of upgrade push message? I read that it is an upgrade of the 808 series.
 
A: This is normal. Now the MX808-908P car system has basically unified the version number (except for the 660 chip, the 660 chip is unified with the Ultra version number).
However, there will be distinctions when it comes to functions. For example, the Benz displayed by the MX808 is V18.43, and it cannot do coding and programming. The MK908 Pro also displays V18.43, but it can do coding and programming, but the function is still not available. the same. So even if the MK906BT is not included in this major update, it can still receive the upgrade.